What conditions need to be met for the installation of boiler soft water equipment?
Categories: Company Blog
Release time:2025-01-06
Many users encounter a series of faults when using boiler softening water equipment due to non-compliance with installation conditions. So, what conditions need to be met for installing boiler softening water equipment?
The conditions that need to be met for installing boiler softening water equipment are as follows:
1. Source water hardness ≤ 8mmol/L (if source water hardness > 8mmol/L, redesign is required);
2. The equipment should be installed on a solid cement platform, and a drainage ditch should be set nearby;
3. The salt tank should be placed close to the resin tank, and the length of the salt suction pipe should be minimized;
4. The boiler softening water equipment must be placed indoors, with an ambient temperature not lower than 2℃ or higher than 50℃, and humidity should be less than 95%, limited to a temperature of 25℃;
5. The power supply should be stable, generally 220V 50Hz;
6. When the boiler softening water equipment is directly connected to heating equipment, a pipe section of more than 3 meters should be maintained and a check valve should be installed;
7. It should be convenient to replenish the regenerant, which is industrial salt without iodine;
8. If underground well water or surface water is used as the water source for softening, it is recommended that users install a suitable fine filtration device in front of the equipment to prevent the resin from being contaminated by deep well silt or other impurities, which would greatly reduce the lifespan of the resin.
Keywords: What conditions need to be met for the installation of boiler soft water equipment?
RELATED INFORMATION
2025-01-06
How to solve the noise issue during the operation of reverse osmosis pure water equipment?
The operation of reverse osmosis equipment is generally indoors.
2025-01-06
What types of pure water equipment are used in industry?
Industrial pure water equipment is divided into deionized water equipment, ultrapure water equipment, and EDI ultrapure water equipment, among others.
2025-01-06
Which is better, EDI ultra-pure water or RO reverse osmosis equipment?
EDI ultrapure water and RO reverse osmosis equipment are both used for the production of pure water in industrial settings.
Company Blog
-
How to solve the noise issue during the operation of reverse osmosis pure water equipment?
Time：2025-01-06
-
What types of pure water equipment are used in industry?
Time：2025-01-06
-
Which is better, EDI ultra-pure water or RO reverse osmosis equipment?
Time：2025-01-06
-
The resistivity of pure water produced by pure water equipment is approximately how much?
Time：2025-01-06
-
What conditions need to be met for the installation of boiler soft water equipment?
Time：2025-01-06
Industry Blog
-
The difference between single-stage reverse osmosis and two-stage reverse osmosis in water treatment equipment
Time：2025-01-06
-
Why is TOC so important in ultrapure water systems?
Time：2024-11-13
-
Phosphorus-containing wastewater treatment equipment processing technology
Time：2024-11-13
-
How to choose a reliable purified water equipment manufacturer?
Time：2024-11-13
-
The difference between purified water equipment and injection water equipment.
Time：2024-11-13
Focus on water treatment, sewage treatment, water supply and drainage and environmental protection equipment research and development and production
